Old weathered wood shingles naturally occurs when wood has been exposed to natural environment for a long period of time. However, if you are repairing a barn or furniture piece that has stood wood and you want to match old style, you can recreate old weathered wood in a short time by applying tried and true methods and materials. You can complete a process of accelerated wear and antiques in 30 to 60 minutes depending on size and scope of project.
How do old weathered wood shingles? Rub surface of wood with a new clay brick or concrete to loosen wood fibers and create an antique look worn. Gently tap edges of wood with brick to manufacture wood damage. Shock and give illusion remains years if damage that has been repainted. Apply water to wood with a sponge or brush. Place timber in direct sunlight and covered with plastic to prevent drying fast. Water will raise grain of wood, creating cracks in surface. Repeat process to make thicker raised grain.
12 Photos Gallery of: Exclusive Weathered Wood Shingles
Then, Paint over entire timber with your choice of old paint. This painting can be found at any hardware or paint supply. If you meet your new paint old paint, take a sample of paint store for infrared analysis. Wipe paint away with a damp cotton. Leave only a thin film on raised timber. Paint will fill cracks in wood, creating an antique look. Reapply paint, wiping away every time. Raised wooden starts to get dark, but wood grain still show through all time to keep deleted painting.
Place painted wood in direct sunlight. Let sundry old paint. Apply glaze on painted weathered wood shingles and let it dry outside sunlight. Glaze is thickened and cracks, creating a cracked antique look. Allow paint to dry and apply satin clear coat. Spray on transparent layer with an electric spray or spray can eliminate brush marks. Apply three coats, allowing 30 minutes drying time between coats.