Removing the plastic garage door window inserts is not a difficult process. You need to remove the seats in the frame as you would if you were to replace the glass in the window. Different types of doors different types of window frames holders.
How diy garage door window inserts? Insert a flat screwdriver between the right side timber retaining strip and the window frame. It is best to start in the vicinity of the center of the timber holder adjacent the stapling heads. Pry the timber holder away from the frame. Insert the screwdriver between the container and the timber frame at each end and gently pry the holder away from the frame. Remove the other hand, retainer, and then the lower container, so that the top retainer latter.
12 Photos Gallery of: Effortless Garage Door Window Inserts
Hold the glass with your fingertips when you remove the top container. Even though the window is in a groove, there is still the risk that the glass can fall in the removal of the container. Pull the glass out of the frame and then remove the plastic insert. If the glass does not come out easily, tap the glass with their fingertips. This will push the window towards you so that you can remove the glass. And your garage door window inserts is ready!